How to Clean Your Gun With WD40 in 3 Steps

You’re just three simple steps away from a clean and protected firearm, with WD40 as your trusty sidekick. First, prepare your gun by removing all ammo and verifying it’s unloaded, then gather your cleaning supplies. Next, apply a light mist of WD40 to key areas like the bolt carrier group, chamber, and slide. Finally, wipe down these areas with a soft cloth and inspect for signs of wear or damage. You’ll be well on your way to a clean gun, and with a few more tips and tricks, you’ll be a pro in no time. Find out how to clean your gun with wd40.

Prepare Your Gun for Cleaning

Before you begin cleaning your gun, remove all ammunition from the vicinity and verify the firearm is unloaded to prevent accidental discharge.

This vital step can’t be overstressed – it’s a fundamental gun safety habit that’ll keep you and others safe. Double-check that the chamber is empty and the magazine is removed. You can’t be too careful when it comes to handling firearms.

Now that you’ve made certain your gun is unloaded, shift your mindset to cleaning mode. A cleaning mindset matters – it’s imperative to focus on the task at hand and avoid distractions.

Set aside a clean, flat surface to work on, and gather your cleaning supplies within easy reach. Take a deep breath, and mentally prepare to give your gun the TLC it needs.

Remember, cleaning your gun is a critical part of responsible gun ownership, and it’s necessary to approach the task with a clear head and a commitment to safety.

With your gun unloaded and your mindset focused, you’re ready to move on to the next step in the cleaning process.

Apply WD40 to Key Areas

With your gun unloaded and your mindset focused, you can now apply a light mist of WD40 to key areas, such as the bolt carrier group, chamber, and slide, to loosen any dirt and grime that may be holding onto the metal surfaces.

Make sure to hold the can upright and spray from about 8-10 inches away to avoid over-saturation. A light coating is all you need, as WD40 is a potent lubricant.

As you apply the WD40, pay attention to areas prone to rust and corrosion, such as the bolt carrier group and chamber. The lubricating properties of WD40 will help prevent rust from forming, ensuring your gun remains in top condition.

If you’re looking for lubricant alternatives, you can also consider using silicone-based lubricants or gun-specific lubricants, but WD40 is a reliable and accessible option.

Remember to be methodical and deliberate in your application, as excessive WD40 can attract dirt and dust. By applying a light mist to key areas, you’ll be well on your way to a clean and well-maintained gun.

Wipe Down and Inspect

Now that the WD40 has had a chance to penetrate and loosen the dirt and grime, grab a soft, lint-free cloth to wipe down the bolt carrier group, chamber, and slide, carefully sweeping away any debris or residue that’s been dislodged.

Be gentle, as you don’t want to scratch any of the gun’s surfaces. As you wipe, pay attention to any areas that still appear dirty or corroded. If you notice any rust spots, take note – you’ll want to address those ASAP to prevent barrel rust and other problems.

Next, inspect your gun’s key areas closely, looking for any signs of wear or damage.

Check the barrel for any signs of rust or corrosion, and make a mental note to give it some extra TLC during your next cleaning session.

This is also a good time to check your gun’s action, ensuring it’s smooth and functioning properly.

Frequently Asked Questions

Can I Use WD40 on All Gun Types, Including Antique Firearms?

You shouldn’t use WD40 on all gun types, especially antique firearms. In fact, it’s essential for gun safety and proper firearm maintenance to choose the right cleaning products specifically designed for your gun’s material and age.

How Often Should I Clean My Gun With WD40 for Optimal Performance?

You should establish a regular maintenance schedule, incorporating frequency checks to determine ideal cleaning intervals, ensuring your gun performs at its best; consider daily, weekly, and monthly cleaning routines to maintain reliability.

Is It Safe to Use WD40 on Gun Scopes and Optics?

You shouldn’t use WD40 on gun scopes and optics, as it can damage lens protection and compromise optical coatings. Instead, opt for a gentle, specialized cleaning solution to maintain your optics remain clear and reliable.

Can I Mix WD40 With Other Cleaning Products for Better Results?

You shouldn’t mix WD40 with other cleaning solutions, as it can create incompatible chemical reactions, compromising product compatibility and potentially damaging your gun’s components. Instead, choose a single, trusted cleaning solution for effective results.

Will Using WD40 on My Gun Void Its Warranty?

You’re right to worry: using WD40 on your gun might void its warranty. Check your warranty terms for cleaning product specifications, as using unauthorized products can have legal implications, potentially nullifying your warranty.